K2 KPA100 out due to static - trying to troubleshoot

[dw-4]

Well, I replaced the diodes in the swr sense circuit but still not go on
the amp.
So I'm running bare-foot for now.

I think I'm going to try to patch into the amp from a little MFJ cub,
through the swr circuit and into a dummy load to see if there is any FWD
and REV voltages present.

Maybe I can clip 5 volts onto the lm358 to see if that chip is following
the diode voltages.

Any hints or tips you feel to offer would be welcome :)
Duane
N1BBR

--
 [hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html