K2 - KPA100 trim caps

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K2 - KPA100 trim caps

aj4tf
Working on KPA100 for K2 # 7841;  the trim caps provided in the cap bag are
yellow and red... the instructions say C1 is white, and C27 is yellow.   I
didn't see any errata on that section;  any guidance would be appreciated.

73,  David AJ4TF



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K2 - KPA100 trim caps

Don Wilhelm
David,

Use the red one at C1.  The white ones had a lower capacity range which
made adjustment a bit more "touchy", but the red ones come close.
The white ones are no longer available.

73,
Don W3FPR

On 12/2/2018 9:26 AM, aj4tf wrote:
> Working on KPA100 for K2 # 7841;  the trim caps provided in the cap bag are
> yellow and red... the instructions say C1 is white, and C27 is yellow.   I
> didn't see any errata on that section;  any guidance would be appreciated.
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: K2 - KPA100 trim caps

Don Wilhelm
David,

I saw your request for that cap in the support emails.  Since there are
many support emails that need to be answered Monday and Tuesday, you may
have quicker results if you send it to [hidden email] instead - be
sure to include the part number for fastest service.

73,
Don W3FPR

On 12/2/2018 11:30 AM, David M wrote:
> Roger that. Thanks.  I have another issue, the kit is short one 0.015
> uF cap. I have contacted support.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]