K2 Keying Mod - Looking for some help

[Ken Miller K6CTW]

All,

I ordered the part I was told to order as the PIN diode is no longer available along with the rest of the keying mod kit.

The part I ordered is E120014   BAP64-05  

It is a surface mounted part that appears to have 3 connections.  Did I order the wrong surface mount part?

If this is the correct part, how do I connect it in place of the existing thru-hole diode?

Thanks in advance for any/all help.

You can reply to me off-list to [hidden email]

73 - Ken
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Ken Miller K6CTW]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Ken,

Yes, it is the proper part.  It has 3 holes, but only 2 are used (pad 1
is not used).
Download the latest K2 manual and look on page 60 to see how to install it.

73,
Don W3FPR

On 11/8/2014 8:00 PM, Ken Miller K6CTW wrote:

> All,
>
> I ordered the part I was told to order as the PIN diode is no longer available along with the rest of the keying mod kit.
>
> The part I ordered is E120014   BAP64-05
>
> It is a surface mounted part that appears to have 3 connections.  Did I order the wrong surface mount part?
>
> If this is the correct part, how do I connect it in place of the existing thru-hole diode?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]