Jacob,
Try setting 8R Hold ON. It sounds like it is set to NOR right now and
with your extended T-R delay, you are hearing the receiver unmute before
the delay time is finished.
See the K2 manual page 89.
73,
Don W3FPR
On 3/10/2012 11:20 AM, jacob chambers wrote:
> Cheers;
>
> I have noticed that when keying my K2 with the crystal filter cinched (200 hz-400) and my audio filter ON in either mode 1 or 2 (the K2 analog CW filter) in certain situations I get an annoying pop or "pssst" sound when sending. I have serial no. 2676 QRP K2 that has had the keying mod performed. I normally use 5 watts with a .12 ms transmit/receive delay. i I built the audio filter to spec and it all tested fine. Any ideas on what I could do to mitigate this minor annoyance?
>
> 73;
> Jacob K4JQV
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
