Hello all
What I did was to stick one of those double sided foam pads about 1 inch
square and 1mm thick the type you stick posters up with onto the bottom cover
then all I did was remove the backing of the pad that would be in contact with
L33 and stick a cut square of black electrical tape onto the sticky pad and it
is very difficult to remove, I have removed the bottom cover a number of
times and it really sticks,please note I have not stuck anything direct to L33,
my thoughts are that a small insulator could be supplied with the kit maybee
a bigger version of the pads that are stuck on the corners of the front panel
board what do you think elecraft..
M1MGD G-QRP 11355
Elecraft K1 #1532
K2 #4785......................72/73..
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
