K2 - Microphone Block Wiring Clarification

[Jeff Hetherington]

Hello Everybody.

I'm sure I've read this right, but before I seal it
back up again, I want to make sure I haven't
misinterpretted the instructions.  I must be tired
because it sounds straight-forward but something keeps
making me re-read it.

I have an Elecraft MD2 microphone.  So the
instructions have stated to install the jumpers first,
then the 5.6K resistor from pin 1 to pin 6.

I have the 8 jumpers all wired straight across.

All I need is to add the 5.6k between the AF and 5V?

This seems to make more sense now that I type it, but
please somebody help me with a yeah or nay!

Thanks.
73/72
Jeff - VA3JFF



=========================================
    L. Jeffrey Hetherington - VA3JFF
      QRP-ARCI (sm) Contest Manager
QRP-ARCI (sm) #9223 / K2 #3375 / KX1 #631

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Jeff,

Go for it, you are on the right path.  Just that resistor between pins 1 and
6 of the mic jack stand in your way.  Count the pins carefully and all will
be well.

73,
Don W3FPR


> -----Original Message-----

> Hello Everybody.
>
> I'm sure I've read this right, but before I seal it
> back up again, I want to make sure I haven't
> misinterpretted the instructions.  I must be tired
> because it sounds straight-forward but something keeps
> making me re-read it.
>
> I have an Elecraft MD2 microphone.  So the
> instructions have stated to install the jumpers first,
> then the 5.6K resistor from pin 1 to pin 6.
>
> I have the 8 jumpers all wired straight across.
>
> All I need is to add the 5.6k between the AF and 5V?
>
> This seems to make more sense now that I type it, but
> please somebody help me with a yeah or nay!
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com