[K2] No int. spkr audio

[Petr, OK1RP/M0SIS]

Hello

Sorry for bothering with maybe stupid task...

My daddy called me this morning that he has no audio on his K2 from
internal speaker. When he plug in the phones it works. (Yda evening int.
spkr worked too)

Is it the problem of switching contact inside of the Phones socket on
the front panel or it can be issue somewhere else please?

I have no K2 on the table and I did not found so much in the manual...:(

Thank You for hints.

73 - Petr, ok1rp
K2/4800
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm-4]

Petr,

The most likely cause is the switch lever inside the headphone jack.  
The switch is the 3 contacts closest to the rear of the K2 RF Board.

Replacement of the headphone jack is the normal fix (Elecraft PN E620028).

If you want to try a temporary fix (the speaker will be active all the
time), you can solder a jumper between the center solder pad of that
switch to the solder pad to the right.
While you have that temporary fix in place, the speaker can be silenced
by placing an unwired 3.5mm plug (either mono or stereo) into the
external speaker jack.

73,
Don W3FPR

On 5/26/2014 10:33 AM, Petr Ourednik wrote:

> Hello
>
> Sorry for bothering with maybe stupid task...
>
> My daddy called me this morning that he has no audio on his K2 from
> internal speaker. When he plug in the phones it works. (Yda evening int.
> spkr worked too)
>
> Is it the problem of switching contact inside of the Phones socket on
> the front panel or it can be issue somewhere else please?
>
> I have no K2 on the table and I did not found so much in the manual...:(
>
> Thank You for hints.
>
> 73 - Petr, ok1rp
> K2/4800
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Petr, OK1RP/M0SIS]

Hi Don,

Mni thanks! I am going to check it with daddy by phone call. Hope it
will not be anything worse...
He is nervous that his K2 is sick. :(

I will let You know abt results.

73 - Petr, ok1rp


On Mon, May 26, 2014, at 04:57 PM, Don Wilhelm wrote:

> Petr,
>
> The most likely cause is the switch lever inside the headphone jack.  
> The switch is the 3 contacts closest to the rear of the K2 RF Board.
>
> Replacement of the headphone jack is the normal fix (Elecraft PN
> E620028).
>
> If you want to try a temporary fix (the speaker will be active all the
> time), you can solder a jumper between the center solder pad of that
> switch to the solder pad to the right.
> While you have that temporary fix in place, the speaker can be silenced
> by placing an unwired 3.5mm plug (either mono or stereo) into the
> external speaker jack.
>
> 73,
> Don W3FPR
>
> On 5/26/2014 10:33 AM, Petr Ourednik wrote:
> > Hello
> >
> > Sorry for bothering with maybe stupid task...
> >
> > My daddy called me this morning that he has no audio on his K2 from
> > internal speaker. When he plug in the phones it works. (Yda evening int.
> > spkr worked too)
> >
> > Is it the problem of switching contact inside of the Phones socket on
> > the front panel or it can be issue somewhere else please?
> >
> > I have no K2 on the table and I did not found so much in the manual...:(
> >
> > Thank You for hints.
> >
> > 73 - Petr, ok1rp
> > K2/4800
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to [hidden email]
> >
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]