K2 Noise Blanker Problem

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K2 Noise Blanker Problem

WD6DBM
I built my K2 some months back with the KNB2 option.  The noise blanker has never been effective against any type of noise.  The MCU recognizes the blanker, it draws the proper amount of current, but just doesn't seem to do anything.  Before drinking the Kool-Aid (TM) I was pretty much a Kenwood man and was used to ineffective noise blankers so I ended up blowing it off.  I recently built a K1, and the NB in it works FB.  This got me thinking, and besides Elecraft would never release a NB that was useless--it violates the Tao of Elecraft.  Yesterday I built another KNB2 (any excuse) and installed it in my K2.  Same result!  I checked all the solder joints, component values, RF board mods.  It makes no difference whether it is NB1, NB2, HI or LO, the preamp is on or off--nothing.  No change in S-meter reading, no change in audio.  Any ideas, oh mighty brains?  

Thanks, Eric WD6DB(lost in noise) 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K2 Noise Blanker Problem

drewko
The K2 NB works very well with light-dimmer noise. If you have a
light-dimmer to test it the results should be dramatic.

73,
Drew
AF2Z



On Thu, 27 Aug 2009 13:20:22 -0700 (PDT),  Eric WD6DB(lost in noise)
wrote:

>I built my K2 some months back with the KNB2 option.  The noise blanker has never been effective against any type of noise.  The MCU recognizes the blanker, it draws the proper amount of current, but just doesn't seem to do anything.  Before drinking the Kool-Aid (TM) I was pretty much a Kenwood man and was used to ineffective noise blankers so I ended up blowing it off.  I recently built a K1, and the NB in it works FB.  This got me thinking, and besides Elecraft would never release a NB that was useless--it violates the Tao of Elecraft.  Yesterday I built another KNB2 (any excuse) and installed it in my K2.  Same result!  I checked all the solder joints, component values, RF board mods.  It makes no difference whether it is NB1, NB2, HI or LO, the preamp is on or off--nothing.  No change in S-meter reading, no change in audio.  Any ideas, oh mighty brains?  
>
>Thanks, Eric WD6DB(lost in noise) 
>______________________________________________________________

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html