[K2] Ooof...

[bdenley]

Built and installed the KNB2.  Assembly went great and looked good.  Test
after install yielded 'NOT INST'.  U3 is in correctly, U1 is in correctly,
the two diodes are in the correct orientation and all pins are soldered.
To make matters worse, the receiver doesn't work now  - lvery ow volume
(with the NB out).  I will keep looking but am open to any ideas.
Thanks
Brian
KB1VBF
http://home.comcast.net/~b.denley/index.html 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html