The P3 can indeed be used with the K2, but the K2 needs a buffer
amplifier to isolate the IF output.
Take a look at Jack Smith's Z10000B buffer amp at
http://www.cliftonlaboratories.com/current_products.htm. He has a
version especially for the K2.
If you transmitted into the XG1, it likely would have no ouptut (in
which case the MAR must be replaced. In your case, try a new battery first.
73,
Don W3FPR
John Chance-Read wrote:
> Can anyone help me with the following :-
> 1. Can the new Elecraft Pan Adaptor be used with the K2 ?
> 2. My Elecraft 7040 sig gen seems to have lost some output - 50uV o/p only reads S5 on the K2 instead of S9 and indeed also on my Orion and no indication on my Oscilloscope which used to indicate 1/3 of a division on the extended range.
> I have probably put a little radiation into it !!.
> What component should I first test/replace.
> 73 G4BOU
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html