K2 PTT Problem

[Arthur Lewis]

I have a K2/100 on the bench that seems to operate well on receive, but will not go into tune. Relays do not engage. I did not build this unit, but it seems to be built reasonably well. I have not worked on a K2 in about four years. Think I am out of practice. Hi Hi

 

How do I do a master reset and where would I find a list of all the Menu functions both 1 and 2? The PA is on, but perhaps there is something else I am missing. I do hear the relay engage at about 15 watts when I turn the power setting up.

 

              Thanks

                   Art

                     WA8VSJ

 

 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Mark Bayern]

> How do I do a master reset and where would I find a list of all the Menu

Sounds like you need to read the manual. Electronic copies can be
obtained from the Elecraft website.

Be careful with that master reset. It should have no effect on any PTT
problems, but it will loose all the filter settings. Look at it this
way -- a master reset will return the radio to factory defaults. But
this radio did not leave the factory in a working condition! <g>

Mark  AD5SS
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com