[K2] Paranoid question

[IZ2NYY]

    I made a disaster in cutting wires for windings of T4 binocular core. I now have not enough white wire for the work. The paranoid question is....are the green and the white wires supplied with K2 kit the same??? Cause i have enough green wire for the 3 windings should be white and anough white wire for the windings should be green!
 
Tnx as usual

IZ2NYY
Giuseppe "Pippo" Sorrentino
Milano ITALY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Pippo,

Yes, you can use the green wire or any other wire of a similar size.  
The reason 2 colors are used is to have visual recognition for the
primary and secondary windings.  If you use the same green wire, I
suggest that you apply some paint or a permanent marker stripe to the
wire so you can tell the difference between the two windings.

73,
Don W3FPR

On 7/26/2011 4:45 AM, Giuseppe Sorrentino wrote:
>      I made a disaster in cutting wires for windings of T4 binocular core. I now have not enough white wire for the work. The paranoid question is....are the green and the white wires supplied with K2 kit the same??? Cause i have enough green wire for the 3 windings should be white and anough white wire for the windings should be green!
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html