I used a K2 for about a year on a 25 amp Radio Shack Switching Power
Supply. I am now using the same supply on an ICOM 910H. There is an
enormous to-and-fro on this reflector about the merits/difficulties of
switching supplies which I do not want to breathe back into existence,
but I have never had any problems with this set-up or with the Pyramid
switcher I use on my K3. These power supplies are small and very
convenient. I use a brutish Astron 70 for my TE Systems amps...it keeps
the shack from sailing away in a high wind.
John Ragle -- W1ZI
=====
On 12/14/2010 10:07 AM, Paul Agoglia wrote:
> I am in the process of assembly of a K2, working on the Front Panel Board. As I move closer to the testing stage (probably another month or so) I am starting to think about how the unit is powered. I am guessing that there is not an internal power supply. I also did not order the battery option. What suggestions are out there for powering the K2? By the way, I do have the 100 watt option, in case that plays a role in choosing a power supply.
>
> I am willing to consider kit power supplies, so any suggestions for pre built and kits are welcome.
>
> 73 de WN2K
> Paul Agoglia
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
