K2 Problem

[WB3AAL]

Hello,

 Today I push a sequence of buttons and I was not sure on what I pushed and
in what order.

My display in the CW mode will have the frequency but the c flashes to a F
and back to a c.

Any ideas?

72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/

K1 - SN 01011
K2 - SN 01392

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[WB3AAL]

Hi,

 I figured out what I did wrong. When I went to send a CW stored message in
the #7 position I did not hit the button #9 and I held in the button #7 too
long.

Thus it switched between the C and F.

72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/

K1 - SN 01011
K2 - SN 01392


----- Original Message -----
From: "Ron Polityka" <[hidden email]>
To: ".Elecraft" <[hidden email]>
Sent: Saturday, February 16, 2008 2:38 PM
Subject: [Elecraft] K2 Problem

> Hello,
>
> Today I push a sequence of buttons and I was not sure on what I pushed and
> in what order.
>
> My display in the CW mode will have the frequency but the c flashes to a F
> and back to a c.
>
> Any ideas?
>
> 72 and Thanks,
> Ron Polityka
> WB3AAL
> www.wb3aal.com
> www.n3epa.org/
>
> K1 - SN 01011
> K2 - SN 01392
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

Ron,

Your K2 is telling you that you have Fast Play CW Messages turned on.  A
tap of one of te numbered buttons will play the assigned message with a
1 button tap.   Check the appropriate section of your manual or download
the Rev G K2 manual and you will find it on page 107.

73,
Don W3FPR

Ron Polityka wrote:
> Hello,
>
> My display in the CW mode will have the frequency but the c flashes to
> a F and back to a c.
>
> Any ideas?
>
>
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com