K2 RF Board C22

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

K2 RF Board C22

Matt Osborn
The instructions call for a 3.3pf capacitor for C22.  The parts list
call for a 2.7pf or an alternate of 3.3pf.

I have one baby blue straight legged cap marked as 2.7c on one side
and 1A on the other.

I'm convinced that this is C22.  Anybody want to talk me out of it?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K2 RF Board C22

Ian Stirling, G4ICV, AB2GR
On Tuesday 14 June 2005 22:12, Matt Osborn wrote:
> The instructions call for a 3.3pf capacitor for C22.  The parts list
> call for a 2.7pf or an alternate of 3.3pf.
>
> I have one baby blue straight legged cap marked as 2.7c on one side
> and 1A on the other.
>
> I'm convinced that this is C22.  Anybody want to talk me out of it?

  I did a complete inventory and nothing was amiss,
except for the six fibre washers. It didn't matter
to me that the packet that arrived just in time had
a split partially broken washer: I put it on the
speaker rather than on one of the two power
transistors.
  The first inventory is the identifying phase and
all substitutes fall into place.

  If C22 is all that's left after everything else is
accounted for, and it is an alternative, it's C22.

--
Ian, K2 #4962
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

RE: K2 RF Board C22

Don Wilhelm-3
In reply to this post by Matt Osborn
If it is marked 2.7 (no matter what its color may be), I would think you
have properly identified the capacitor to be used in the C22 position.

Have fun building, solder well, follow the instructions carefully, and you
will reap your rewards.

73,
Don W3FPR

> -----Original Message-----
>
> The instructions call for a 3.3pf capacitor for C22.  The parts list
> call for a 2.7pf or an alternate of 3.3pf.
>
> I have one baby blue straight legged cap marked as 2.7c on one side
> and 1A on the other.
>
> I'm convinced that this is C22.  Anybody want to talk me out of it?
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.1 - Release Date: 6/13/2005

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K2 RF Board C22

Matt Osborn
In reply to this post by Matt Osborn
Thanks for the confirmation.

I'm always amazed when I get to the last capacitor and find that it is
the right one.

Christine does a great job packing all those little bags!

On Tue, 14 Jun 2005 21:23:56 -0500, kc5wa <[hidden email]> wrote:

>nope! that's it.........same here on K2 #4948.
>
>Matt Osborn wrote:
>
>>The instructions call for a 3.3pf capacitor for C22.  The parts list
>>call for a 2.7pf or an alternate of 3.3pf.
>>
>>I have one baby blue straight legged cap marked as 2.7c on one side
>>and 1A on the other.
>>
>>I'm convinced that this is C22.  Anybody want to talk me out of it?
>>_______________________________________________
>>Elecraft mailing list
>>Post to: [hidden email]
>>You must be a subscriber to post to the list.
>>Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft   
>>
>>Help: http://mailman.qth.net/subscribers.htm
>>Elecraft web page: http://www.elecraft.com
>>
>>
>>
>>
>>  
>>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com