K2 RF Board P5 speaker connector orientation

[Mark Petrovic]

The K2 RF board assembly instructions say to install P5 *with the vertical
locking ramp toward S1*.  I don't know how to interpret this.  Does this
mean when P5 is installed, the pins are closer to S1 than the locking ramp
is?  Or the other way around?

Thanks.
Mark
AE6RT

--
Mark
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Mark,

Look at the silkscreen on the board.  The orientation tab on the P5
header is clearly marked.  The tab mounts closest to S1.  The pins are
away from S1.

73,
Don W3FPR

On 5/1/2018 11:14 PM, Mark Petrovic wrote:
> The K2 RF board assembly instructions say to install P5 *with the vertical
> locking ramp toward S1*.  I don't know how to interpret this.  Does this
> mean when P5 is installed, the pins are closer to S1 than the locking ramp
> is?  Or the other way around?
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]