[K2] RF Board c228 broken!!

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

[K2] RF Board c228 broken!!

IZ2NYY
Hy to all, trying and re trying i finally succedeed in brake a component. It's
the little cap 228 on rf board marked as 560. The damage is well visible on
image on link above. I must replace it and want to know if i have to find a
prticular type of cap as a replacement.

Many tnx

http://tinypic.com/r/t0ivif/7
 IZ2NYY
Giuseppe "Pippo" Sorrentino
Milano ITALY


     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Pippo
IZ2NYY
Reply | Threaded
Open this post in threaded view
|

Re: [K2] RF Board c228 broken!!

Don Wilhelm-4
  Pippo,

That is in the 40 meter low pass filter, so most any 56 pF capacitor
will work fine if it fits physically.
I would likely use an NP0 or C0G type if I had one available.

73,
Don W3FPR

On 1/14/2011 6:38 AM, Giuseppe Sorrentino wrote:
> Hy to all, trying and re trying i finally succedeed in brake a component. It's
> the little cap 228 on rf board marked as 560. The damage is well visible on
> image on link above. I must replace it and want to know if i have to find a
> prticular type of cap as a replacement.
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html