K2 RF board

[Rick-94]

Hi all, I am just trying to make sure I don't have a problem on K2 rf
board. L1 slug inductor can ground and one leg of capacitor C4 have a
solder bridge and I can't tell if the pads were together or supposed to
be kept separate. I'm thinking it is OK that they are bridged with solder.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Rick,

It is OK, both points are grounded.

73,
Don W3FPR

On 3/12/2017 5:15 PM, Rick A. wrote:

> Hi all, I am just trying to make sure I don't have a problem on K2 rf
> board. L1 slug inductor can ground and one leg of capacitor C4 have a
> solder bridge and I can't tell if the pads were together or supposed to
> be kept separate. I'm thinking it is OK that they are bridged with solder.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]