K2 RF probe

[Christophe F8ACF-56]

Good evening to all,

I asked a question about the RF probe, I have the diagram on page 46 with the ability to " 10 pf" but there is another mounting tool spacing of buttons on the front panel with a capacity, diode, a resistor, the same probe is?

http://cjoint.com/?CBuv2IFpL0f

is what I'm confused?


while Miss the right solution

thank you for your help

# 7369, Cris F8ACF

 
73 , Christophe F8ACF-56
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Chris,

The diagram on page 46 is for what is commonly referred to as the
"internal counter probe"
Yes, the Probe package contains other parts for constructing an RF Probe
(see page 9 of Appendix E for a schematic).  There are no instructions
for constructing the RF Probe, but it is almost self explanatory.  Yes,
the circuit traces for the RF Probe is built onto the back of the
"Switch Spacing Tool"

73,
Don W3FPR

On 2/20/2013 4:03 PM, Christophe F8ACF-56 wrote:
> Good evening to all,
>
> I asked a question about the RF probe, I have the diagram on page 46 with the ability to " 10 pf" but there is another mounting tool spacing of buttons on the front panel with a capacity, diode, a resistor, the same probe is?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Christophe F8ACF-56]

good evening everyone, and thank you Don,

thank you for the information so I will build it as in the manual

a short video for the first cry of K2 # 7369

==>: Http://dl.free.fr/daj5O8QaD
 
73 , Chris F8ACF-56


________________________________
 De : Don Wilhelm <[hidden email]>
À : Christophe F8ACF-56 <[hidden email]>
Cc : "[hidden email]" <[hidden email]>
Envoyé le : Jeudi 21 février 2013 21h08
Objet : Re: [Elecraft] K2 RF probe
 
Chris,

The diagram on page 46 is for what is commonly referred to as the "internal counter probe"
Yes, the Probe package contains other parts for constructing an RF Probe (see page 9 of Appendix E for a schematic).  There are no instructions for constructing the RF Probe, but it is almost self explanatory.  Yes, the circuit traces for the RF Probe is built onto the back of the "Switch Spacing Tool"

73,
Don W3FPR

On 2/20/2013 4:03 PM, Christophe F8ACF-56 wrote:
> Good evening to all,
>
> I asked a question about the RF probe, I have the diagram on page 46 with the ability to " 10 pf" but there is another mounting tool spacing of buttons on the front panel with a capacity, diode, a resistor, the same probe is?
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html