5601 arrived today at 1830 UTC 20Jul2006, a day
earlier than UPS estimated, and is alive and well.
Looks absolutely great.
So far have only tested the KIO2, communicated with
HamRadioDeluxe FB.
I noticed there's a small hole on the back labeled
GND, but nothing coming out of it to attach a ground
wire to. Appears you need the internal ATU to get the
GND binding post. How do those of you w/o the internal
ATU ground the rig? My 1st thought would be to use an
appropriately sized screw, with lock washer and nut,
making sure to scrape off paint to get a good ground,
then screw on a wingnut. But do I need to connect a
wire from the screw on the inside to a circuit board,
and if so which one and where?
Will be giving the rig a thorough test in the next few
days.
72 de N8PVZ
---bernie
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
