Guy's...
Just a "quickie" to make sure that I have this correct (or not as the case
maybe..!)
I am currently at the first stage of "Power Up" with my K2...
page 41 in the manual...
I have found what I "think" is the power connector...and also some
black and red lead wire from my junk box...
What I have done...is
Connect the RED wire to the SMALL pin on the connector (as this "seems" to
be the one going to the CENTRE pin)... and then the BLACK wire to the LONG
pin on the connector that I have here...
Is this the correct wiring for the Power Connector for the K2..??
Andy
[hidden email] "...I Just See It.!.." John A. Ross
(RSD Communications circa 2004)
A.R.S.
GM0NWI QRP "..It is vain to do with
more.... "A Dis-Orientated Kiwi...
"K2 S/n 01432 Soon To Be On-Air" what can be done with
less.. In The Northern Hemisphere..."
GQRP No.9576
QRP-L No.2165
ARCI No.10561
Alaska QRP Club No.190
Flying Pigs QRP Club No. FP#-1061
ICQ No.31899603
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
