K2 SCK Voltage

[Donald Currier]

Hello All,

I have been performing the voltage checks on #5885 K2, and I am  
getting 5 volts on SCK. Manual calls for 0 volts. I searched for  
other notes on SCK voltage, and have found that some other builders  
ran across the same problem, but I can't find where anyone wrote  
about what might be the cause. I have triple checked everything for  
cold joints, and solder bridges and can't seem to find any mechanical  
problem.


Any advice appreciated.

Thanks es 73
Don
W0DJC
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Don,

Not to worry, it is the same on all K2s - the chart in the manual is
incorrect.

73,
Don W3FPR

> -----Original Message-----
>
> I have been performing the voltage checks on #5885 K2, and I am
> getting 5 volts on SCK. Manual calls for 0 volts. I searched for
> other notes on SCK voltage, and have found that some other builders
> ran across the same problem, but I can't find where anyone wrote
> about what might be the cause. I have triple checked everything for
> cold joints, and solder bridges and can't seem to find any mechanical
> problem.
>
>
> Any advice appreciated.
>
> Thanks es 73
> Don
> W0DJC
>

--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.432 / Virus Database: 268.15.29/607 - Release Date: 12/28/2006
12:31 PM

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com