K2 SN 2615, KSB2 Rev D. manual

[Elecraft mailing list]

Hi!My K2 has no output on SSB. Works fine on CW.I need a PDF of the KSB2 Rev. D. manual.The current manual is Rev. G and assumes U3 is an SSB2166 that is surface mount with 14 pins.My U3 is an SSM2165, non-surface mount with 8 pins.
Where can I find a PDF of the older manual?Thanks.
Vron
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Vron,

I will send you a copy off-list.

73,
Don W3FPR

On 6/25/2017 1:44 PM, Vron Jones via Elecraft wrote:
> Hi!My K2 has no output on SSB. Works fine on CW.I need a PDF of the KSB2 Rev. D. manual.The current manual is Rev. G and assumes U3 is an SSB2166 that is surface mount with 14 pins.My U3 is an SSM2165, non-surface mount with 8 pins.
> Where can I find a PDF of the older manual?Thanks.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]