Ken -
I installed/built KSB2 in my K2 # 5422, last month.
I got poorly sounding "filters", before I went thru
an entire "SPECTROGRAM rev 5.7" filter and BFO
settings alignment. Spectrogram 5.7, is the
last free version of this software. I used my
laptop's sound card system (mike input), to
run the K2 filter alignments, using a stereo
cable with double stereo tips. (K2 remote
speaker connector to PC laptop's mike input)
On the KSB2's manual, page 10, - did you record and
save the "calibration number" that was included
with the SSB filter crystals set (X1-X7)? With this
you should have gotten your LSB/USB TRANSMIT
BFO FREQUENCIES - for "BF1t", etc.
Did you ground the crystal cases of X1-X7, as shown
on page 10?
By the way - I ended up using a Ten Tec 701 mobile
ham mike, which I bought from Ten Tec for like
$22 us. I've got an install-sheet for the K2,
for that mike.
Good Luck, 73's
Fred N3CSY
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
