K2 SSB microphone configuration

[Mark Petrovic]

I am installing the KSB2 SSB Adapter into my K2 S/N 7809.  I have the
Elecraft MH4 microphone, which includes 8 jumpers and one 5.6K resistor.
My KSB2 manual shows the configuration for the Elecraft MH2 and MD2, and
I've read in the MH4 PDF manual that it has the same configuration as the
MH2.

However, I am confused about the jumpers and the P1 microphone
configuration pin set.  I believe I am to install all 8 jumpers (one
joining AF to pin1, PTT to pin2, etc.) *and* the 5.6K resistor across pins
1 and 6.  Is that correct?

Thanks.
Mark
AE6RT

--
Mark
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]