Mike,
Is it possible that you have the K2 set for VOX operation ('L' or 'U'
indicator blinking)? - if so, the VOX delay will increase the time for
switching back to receive. The PTT switch will still activate the transmit
condition even though VOX is selected. Press the TEST/VOX button until Ptt
is indicated and try it. With PTT selected, the transition time should be
the same as on CW, and that delay can be controlled by the 8R hold time set
in the menu by the T-R parameter.
73,
Don W3FPR
> -----Original Message-----
>
> Hi,
> I'm not sure if anyone else has noticed this but the time for my
> K2 to switch from transmit back to receive in the SSB mode seems
> a bit lengthy. It's probably in the 200-400 mS range which is
> annoying. Am I missing a menu controlled item or is something wrong?
>
> Any insight would be appreciated.
>
> After logging 147 contacts during FD at the 5W level, this issue
> became very annoying.
>
> Thanks
>
> Mike, WA1SEO
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.5/32 - Release Date: 6/27/2005
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
