[K2] Serial number 00001

[Elecraft mailing list]

It would be great to see a picture of the circuit boards of that radio!

Taking into account 20+ years of of ECOs and experimental mods, I am visualizing lots of jumpers and random capacitors…

Doug, w0uhu.


Message: 8
Date: Mon, 18 May 2020 12:43:36 -0700
From: Wayne Burdick <[hidden email] <mailto:[hidden email]>>
To: George P Linehan III <[hidden email] <mailto:[hidden email]>>
Cc: Elecraft Reflector <[hidden email] <mailto:[hidden email]>>
Subject: Re: [Elecraft] ISO Elecraft K2 QRP Or 100 watt.
Message-ID: <[hidden email] <mailto:[hidden email]>>
Content-Type: text/plain; charset=us-ascii

I have K2/10 S/N 00001, but I'm not sure I want to part with it.

Wayne
N6KR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Doug,

I have SN 00020 which is a field test model, and I suspect that it is
not much different than Wayne's SN 00001.
The boards are relatively clean, and I do have all the FT mods (not
many) plus all the K2 A to B mods installed.  Most of the FT mods were
component value changes.
There are NOT a lot of jumpers and random capacitors.
Wayne does a lot of initial work using simulation, and as a result there
are not a lot of extra cuts and adds.

73,
Don W3FPR

On 5/19/2020 10:19 AM, Douglas Hagerman via Elecraft wrote:

> It would be great to see a picture of the circuit boards of that radio!
>
> Taking into account 20+ years of of ECOs and experimental mods, I am visualizing lots of jumpers and random capacitors…
>
> Doug, w0uhu.
>
>
> Message: 8
> Date: Mon, 18 May 2020 12:43:36 -0700
> From: Wayne Burdick <[hidden email] <mailto:[hidden email]>>
> To: George P Linehan III <[hidden email] <mailto:[hidden email]>>
> Cc: Elecraft Reflector <[hidden email] <mailto:[hidden email]>>
> Subject: Re: [Elecraft] ISO Elecraft K2 QRP Or 100 watt.
> Message-ID: <[hidden email] <mailto:[hidden email]>>
> Content-Type: text/plain; charset=us-ascii
>
> I have K2/10 S/N 00001, but I'm not sure I want to part with it.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]