K2 Serial

[Michael B-6]

What are they parameters for the K2 serial ie. baud rate, data bits, parity,
stop bits, and flow control?

--
W2CVZ,
Michael
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Mark Bayern]

Michael,

What? You can't look it up yourself? You can't ask me?

Check the Elecraft website for the manuals. The command set is
documented in the KIO2 Programmer's Reference manual, the comm
parameters are in the KIO2 manual.

KIO2 manual (with baud rate, etc)
<http://www.elecraft.com/manual/KIO2_man_rev_B.pdf>

Reference manual (with command set descriptions):
<http://www.elecraft.com/manual/KIO2%20Pgmrs%20Ref%20rev%20E.pdf>

Daddy  AD5SS
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jack Brindle]

Some of us will be nice...

4800 bps, 7 data bits, although 8 will work (you will need to strip  
off the msb). 1 stop bit (2 will work), no parity, no flow control.  
It is a very forgiving interface for low-level format.

The info is in the KIO2 manual and detailed info in the KIO2  
programmer's guide. Be careful reading that programmer's guide - it  
will lead to using up lots of your time when you start crafting the  
latest great rig control program, ;-)

On Jun 25, 2007, at 6:21 AM, Michael B wrote:

> What are they parameters for the K2 serial ie. baud rate, data  
> bits, parity,
> stop bits, and flow control?
>
> --
> W2CVZ,
> Michael
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

- Jack Brindle, W6FB
------------------------------------------------------------------------
---------------------


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com