Another minor issue is that the audio drive will vary somewhat depending on which audio frequency is selected. i.e. 600 hertz vs 1800 Hz. will not exhibit the same energy to the radio. Soundcards are not flat, many rigs are not either.
So if you set levels for one (if RTTY, pair of) frequency, you can over/under drive the rig. Under is better than over, at least you don't produce the dreaded IMD complaints but you may miss the contact too.
;-)
73,
Rick wa6nhc
Tiny iPhone 5 keypad, typos are inevitable
On Apr 14, 2013, at 1:33 PM, Don Wilhelm <
[hidden email]> wrote:
> Yes, the K2 transmit gain can change with the various bands. There is some level of TX RF gain compensation in the K2 circuits, but it is not perfect.
>
> <snip>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
