K2: Size of RFC15 - No different from green ones

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

K2: Size of RFC15 - No different from green ones

David Woolley (E.L)
The manual says that RFC15, as well as being tan coloured, should be
much smaller than the other 100 microHenry chokes, but it appears to be
the same size as the four green ones, namely about 6.3 mm long by 2.1 mm
diameter.  The obvious reason for this was that it was being used to
patch between pads that are only about 3 mm apart.

Is there now no real difference except colour?

--
David Woolley
Emails are not formal business letters, whatever businesses may want.
RFC1855 says there should be an address here, but, in a world of spam,
that is no longer good advice, as archive address hiding may not work.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

RE: K2: Size of RFC15 - No different from green ones

Ron D'Eau Claire-2
I suspect the small tan RFC15 has been dropped from the kit, David, so you
have all the same-size RFC15 inductors now.

Ron AC7AC

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of David Woolley
Sent: Tuesday, June 12, 2007 4:05 PM
To: Elecraft Reflector
Subject: [Elecraft] K2: Size of RFC15 - No different from green ones


The manual says that RFC15, as well as being tan coloured, should be
much smaller than the other 100 microHenry chokes, but it appears to be
the same size as the four green ones, namely about 6.3 mm long by 2.1 mm
diameter.  The obvious reason for this was that it was being used to
patch between pads that are only about 3 mm apart.

Is there now no real difference except colour?

--
David Woolley
Emails are not formal business letters, whatever businesses may want.
RFC1855 says there should be an address here, but, in a world of spam, that
is no longer good advice, as archive address hiding may not work.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: K2: Size of RFC15 - No different from green ones

David Woolley (E.L)
In reply to this post by David Woolley (E.L)
David Woolley wrote:
> The manual
> says that RFC15, as well as being tan coloured, should be much smaller
> than the other 100 microHenry chokes, but it appears to be the same size

An off list reply pointed out that there is a recent constructor
bulletin on this point, although it doesn't quite say that they are now
the same size.

The bulletin is at
<http://www.elecraft.com/Apps/Builder%20Alert%20Installing%20Small%20Chokes%20Rev%20B.pdf>.

Thanks.

> as the four green ones, namely about 6.3 mm long by 2.1 mm diameter.  
> The obvious reason for this was that it was being used to patch between
> pads that are only about 3 mm apart.
>
> Is there now no real difference except colour?
>


--
David Woolley
Emails are not formal business letters, whatever businesses may want.
RFC1855 says there should be an address here, but, in a world of spam,
that is no longer good advice, as archive address hiding may not work.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com