K2 Soundbite

[TJ Campie]

might want to include the link:
http://www.imagecabin.com/?view=26282404903dba394a8304548

TJ
W0EA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Vic K2VCO]

Tom Campie wrote:
> might want to include the link:
> http://www.imagecabin.com/?view=26282404903dba394a8304548

I hear two things: a roughness in the signal and a buzzing when it exceeds a certain
loudness. The roughness might be caused by the NB, if it's on and if there's a pulse noise
that it's blanking. The buzzing is something else...is this being recorded from the
speaker? If so, I'd suspect that the frame is warped and the voice coil is rubbing the magnet.

Of course, neither of these might fit...
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html