Ed,
There is no easy way to do that. The K2 does not emit any RF when using
the SPOT button, it just injects a tone into the audio.
You could switch the K2 to a dummy load and tap the key, - don't forget
to switch the K2 back to the antenna before transmitting if you want to
make any contacts.
73,
Don W3FPR
Ed G wrote:
> Hello,
> I don't have any trouble using the K2 SPOT switch when using the K2 as
> a transceiver. However, when using the K2 as a CW transmitter only (with a
> homebrew T/R switch and an older boatanchor receiver) the K2 SPOT function
> doesn't seem to put out any kind of signal I can hear in the boatanchor
> receiver, so I can't really "spot" the K2. I only use the K2 in this
> configuration occasionally, but wonder if anyone else has a recommendation
> for CW spotting with an external receiver? Is there a way to adjust SPOT
> strength?
> --Ed--
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.716 / Virus Database: 270.14.110/2568 - Release Date: 12/16/09 03:02:00
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html