K2 Straight key auto detect

classic Classic list List threaded Threaded
24 messages Options
12
Reply | Threaded
Open this post in threaded view
|

Re: Freq Editor req for update - allow entry of WX freqs

Bruce Beford-4
My understanding is that the KX3 (not the K3) _CAN_ tune the WX band for RX.
Bruce/N1RX
 
> The K3/KX3 can't tune those frequencies ... even with the
> 2 meter transverters.  Those frequencies would be well above
> 30 MHz (IF limit).
 
73,
 
    ... Joe, W4TV
 
 
On 2014-09-20 5:31 PM, Jeff Herr wrote:
> Would it be possible to get the k3/kx3 freq memory editor ver 1.3.3.0
> updated to allow entry of the NOAA weather channels?
>
> 162.400, .425, .450, .475, 162.500, .525, .550
>
> currently i get a little red exclamation mark error.
>
>

 

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Freq Editor req for update - allow entry of WX freqs

Phil Wheeler-2
In reply to this post by Joe Subich, W4TV-4
Hey, Joe --

 From the Elecraft KX3 Module FAQ:

*Q:What frequency range will the module cover?*

A:On 2 meters: About 120 to 165 MHz, allowing copy
of weather-band stations at 162 MHz, airport tower
AM in the 120 MHz range, etc. On 4 meters: About
65-72 MHz. Sensitivity gradually falls off outside
the associated ham bands.

Phil W7OX

On 9/20/14, 3:33 PM, Joe Subich, W4TV wrote:

>
> The K3/KX3 can't tune those frequencies ... even
> with the
> 2 meter transverters.  Those frequencies would
> be well above
> 30 MHz (IF limit).
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2014-09-20 5:31 PM, Jeff Herr wrote:
>> Would it be possible to get the k3/kx3 freq
>> memory editor ver 1.3.3.0
>> updated to allow entry of the NOAA weather
>> channels?
>>
>> 162.400, .425, .450, .475, 162.500, .525, .550
>>
>> currently i get a little red exclamation mark
>> error.
>>
>>
>>
>> Jeff Herr,  WW6L
>> 4636 Kelton Way
>> Sacramento, Ca 95838
>> 916.925.6089

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Freq Editor req for update - allow entry of WX freqs

Matt Zilmer-3
In reply to this post by Bruce Beford-4
The KX3 with KX3-2M is able to tune frequencies in the range 120-168
MHz.  See p53 of the owner's manual for the specs.

73,
matt
W6NIA

On Sat, 20 Sep 2014 20:45:45 -0400, you wrote:

>My understanding is that the KX3 (not the K3) _CAN_ tune the WX band for RX.
>Bruce/N1RX
>
>> The K3/KX3 can't tune those frequencies ... even with the
>> 2 meter transverters.  Those frequencies would be well above
>> 30 MHz (IF limit).
>
>73,
>
>    ... Joe, W4TV
>
>
>On 2014-09-20 5:31 PM, Jeff Herr wrote:
>> Would it be possible to get the k3/kx3 freq memory editor ver 1.3.3.0
>> updated to allow entry of the NOAA weather channels?
>>
>> 162.400, .425, .450, .475, 162.500, .525, .550
>>
>> currently i get a little red exclamation mark error.
>>
>>
>
>
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to [hidden email]
Matt Zilmer, W6NIA
--
"Give me six hours to chop down a tree and I will
spend the first four sharpening the axe." -A. Lincoln
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Freq Editor req for update - allow entry of WX freqs

Joe Subich, W4TV-4

OK guys ... I get the message. The K3 is not able to tune Weather band.

73,

    ... Joe, W4TV


On 2014-09-20 9:10 PM, Matt Zilmer wrote:

> The KX3 with KX3-2M is able to tune frequencies in the range 120-168
> MHz.  See p53 of the owner's manual for the specs.
>
> 73,
> matt
> W6NIA
>
> On Sat, 20 Sep 2014 20:45:45 -0400, you wrote:
>
>> My understanding is that the KX3 (not the K3) _CAN_ tune the WX band for RX.
>> Bruce/N1RX
>>
>>> The K3/KX3 can't tune those frequencies ... even with the
>>> 2 meter transverters.  Those frequencies would be well above
>>> 30 MHz (IF limit).
>>
>> 73,
>>
>>     ... Joe, W4TV
>>
>>
>> On 2014-09-20 5:31 PM, Jeff Herr wrote:
>>> Would it be possible to get the k3/kx3 freq memory editor ver 1.3.3.0
>>> updated to allow entry of the NOAA weather channels?
>>>
>>> 162.400, .425, .450, .475, 162.500, .525, .550
>>>
>>> currently i get a little red exclamation mark error.
>>>
>>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
> Matt Zilmer, W6NIA
> --
> "Give me six hours to chop down a tree and I will
> spend the first four sharpening the axe." -A. Lincoln
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
12