Just when you think you have seen everything, something comes along and bites
you in the b*m.
Having completed yet another mod to my K2, I put it back into it's rightful
place on the operating desk, connected the KAT100/KPA100, PSU, desk microphone,
computer leads, and then switched on.
The K2 was set to 40m and I could hear signals, but also I was getting audio
feedback from my microphone and this was on RECEIVE !
Thinking that something had not powered up correctly, I powered the K2 off then
on - still the same problem. Must be some Menu setting that I had forgotten, so
press the Menu button - nothing changes on the display - What the *!&*$ ?
NONE of the secondary functions of the front panel work. What have I blown up ?
Decided to take the K2 cover off and see what I had messed up with the latest
mod. Removed the K2 from the back of the operating desk, and started to
disconnect all attached cables.
Then I found it..... Instead of plugging in the 3.5mm plug on the foot switch
into the Key socket I had plugged in the 3.5mm plug from the soundcard !!
Everything works fine now the correct plugs are in the correct sockets.
You live and learn...
73
Stewart G3RXQ
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
