K2: Suggestions wanted on slightly hotrodding an early S/N K2

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

K2: Suggestions wanted on slightly hotrodding an early S/N K2

Allan Taylor
I have recently purchased a very early K2 (S/N 152) and would like
reasonable suggestions on how to up slightly the output of the PA
stage. Recalling from way back when
I actually built a K2 (S/N 157, subsequently sold), the available
drive was affected by winding of toroids, selection of driver
transistor etc. I can't go class C as I have the
ssb module in the rig.  My goal is to have the power level of the
Tentec Argonaut V but with the K2 receiver! My interests are entirely
portable/backcountry use.

--
73     Allan    K7GT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: K2: Suggestions wanted on slightly hotrodding an early S/N K2

Don Wilhelm-4
Allan,

You will not be able to achieve the 20 watts of the Argo V with the K2.  
Expect 12 watts to 15 watts depending on the band.

The winding of T1 and T2 are important to the power output on the higher
bands, especially T2 which should be mounted about 1/8 inch above the
board for best results.  See the winding details in the new manual.

73,
Don W3FPR

Allan Taylor wrote:

> I have recently purchased a very early K2 (S/N 152) and would like
> reasonable suggestions on how to up slightly the output of the PA
> stage. Recalling from way back when
> I actually built a K2 (S/N 157, subsequently sold), the available
> drive was affected by winding of toroids, selection of driver
> transistor etc. I can't go class C as I have the
> ssb module in the rig.  My goal is to have the power level of the
> Tentec Argonaut V but with the K2 receiver! My interests are entirely
> portable/backcountry use.
>
>  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html