Jean,
Yes, that is true, both VFOs must be in the same band.
The K2 cannot change bands by just moving the VFO from one band to
another, you must use the BAND+/BAND- buttons.
If you do move the VFO from one band to another, the displayed
frequency will change, but the VFO will not follow very far outside the
band that you moved away from.
73,
Don W3FPR
On 7/29/2013 8:20 AM, Behiels JeanPierre wrote:
> Hi K2 users;
>
> I do found next K2-software stage ?
> The K2 VFO memory does'nt take next two different VFO settings (example of two different band settings) VFO A = 20M and VFO B = 17M
> In this situation when we switch back to the other VFO,this switched VFO also take the VFO frequency from the VFO where you coming from in last button push ??
> You not can put in VFO A a 17M frequency,and in the other VFO B,by example a 20M frequency.
> They both always take the originaly frequency from one band where you coming from ??
> One of the "two different band" frequencys will not stay into the memory ?
> I presume this has a particular Elecraft reason hi ..
>
> Regards Jean ON4AEF.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
