Elecraft

K2 Tilt stand

Classic

List

Threaded

4 messages Options

Gordon LaPoint

K2 Tilt stand

Is there a shorter K2 tilt stand available? I would like one that is
about 1/2 as high as the standard one. Its too low with the stand
folded and too high with it up.

Thanks,

Gordon - N1MGO

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm

Re: K2 Tilt stand

Gordon,

Yes, it is ETS2.
Go to the Elecraft website Quick Order, then open Classic Transceivers
and K2 Accessoriesl and cliick on ETS15.

73,
Don W3FPR

On 4/19/2019 6:00 AM, Gordon LaPoint wrote:
> Is there a shorter K2 tilt stand available? I would like one that is
> about 1/2 as high as the standard one. Its too low with the stand
> folded and too high with it up.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Gordon LaPoint

Re: K2 Tilt stand

Don,
Thanks! Just what I needed, I put one on order.
73,
Gordon - N1MGO

On 4/19/2019 7:55 AM, Don Wilhelm wrote:

> Gordon,
>
> Yes, it is ETS2.
> Go to the Elecraft website Quick Order, then open Classic Transceivers
> and K2 Accessoriesl and cliick on ETS15.
>
> 73,
> Don W3FPR
>
> On 4/19/2019 6:00 AM, Gordon LaPoint wrote:
>> Is there a shorter K2 tilt stand available? I would like one that
>> is about 1/2 as high as the standard one. Its too low with the stand
>> folded and too high with it up.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Don Wilhelm

Re: K2 Tilt stand

Sorry for the typo in the first line - the ETS2 is the standard 3 inch
tilt stand, the ETS15 is the 1.5 inch short tilt stand.

It is normally used with the KAT100 when the K2 is stacked on top of the
KAT100, but it can be used in other configurations as well - owner's choice.

73,
Don W3FPR

On 4/19/2019 10:56 AM, Gordon LaPoint wrote:

> Don,
> Thanks! Just what I needed, I put one on order.
> 73,
> Gordon - N1MGO
>
> On 4/19/2019 7:55 AM, Don Wilhelm wrote:
>> Gordon,
>>
>> Yes, it is ETS2.
>> Go to the Elecraft website Quick Order, then open Classic
>> Transceivers and K2 Accessoriesl and cliick on ETS15.
>>
>> 73,
>> Don W3FPR
>>