Ron,
Do you have power output on any band? Try them and see.
The display of 0.1 watts is as low as it will indicate. An indicated
'output' of 0.1 or 0.2 usually means no power output at all.
Check the other bands and get back with us for further troubleshooting,
your answer will indicate where to look next. If you do not have power
output on any band, you will likely need to build the RF Probe from the
parts provided with your kit (unless you have an oscilloscope with a 10x
probe).
73,
Don W3FPR
Ron McCurdy wrote:
>
> I had trouble aligning on all bands with the KPA. So, I rewound T5 and
> found D21 broken and replaced it. Now, the power is erratic. I once
> had the 2 watts set on 7100 hz and now it won’t go above 0.1 watts. Is
> there a way to reset the K2 power output? I’ve gone clear back to the
> beginning and everything works perfectly until I get to the
> transmitter alignment. No, I don’t have the KPA100 connected.
>
> Ron, KE5QDA
>
>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
