K2 U1 part number

[WA4KBD]

The K2 manual lists SA602 for U1 on the control board and the part number in my kit is SA612.  Is this IC OK to install?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Nigel A. Gunn G8IFF/KC8NHF]

Same device, different number. Goo ahead and melt solder.


Bill Reid wrote:
> The K2 manual lists SA602 for U1 on the control board and the part number in my kit is SA612.  Is this IC OK to install?
> _______________________________________________
>  

--
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Nigel A. Gunn. 59 Beadlemead, Milton Keynes, MK6 4HF, England.
Tel [phone]       mobile [phone]
e-mail [hidden email]             www  http://www.ngunn.net 
Amateur radio stations  G8IFF, KC8NHF
Member of  ARRL, GQRP Club, QRPARCI, SOC #548,  Flying Pig #385,
           Dayton ARA #2128, AMSAT-NA  LM-1691,  MKARS,  RAYNET
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Alexandra Carter]

The way I do it, is melt slobber and "goo" ahead! 73 de Alex NS6Y

On Apr 21, 2006, at 3:24 PM, Nigel A. Gunn G8IFF/KC8NHF wrote:

> Same device, different number. Goo ahead and melt solder.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Alexandra Carter]

Yep the NE602/SA602/SA612 are the same part as far as I know! 73 de
Alex NS6Y
(KX1 LED still white, just checked!)

On Apr 21, 2006, at 3:15 PM, Bill Reid wrote:

> The K2 manual lists SA602 for U1 on the control board and the part
> number in my kit is SA612.  Is this IC OK to install?

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Nigel A. Gunn G8IFF/KC8NHF]

I've not got a KX1 LED. Do I need one?

Alexandra Carter wrote:
> Yep the NE602/SA602/SA612 are the same part as far as I know! 73 de
> Alex NS6Y
> (KX1 LED still white, just checked!)
>

--
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Nigel A. Gunn. 59 Beadlemead, Milton Keynes, MK6 4HF, England.
Tel [phone]       mobile [phone]
e-mail [hidden email]             www  http://www.ngunn.net 
Amateur radio stations  G8IFF, KC8NHF
Member of  ARRL, GQRP Club, QRPARCI, SOC #548,  Flying Pig #385,
           Dayton ARA #2128, AMSAT-NA  LM-1691,  MKARS,  RAYNET
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jack Brindle]

Actually the SA612 is a better part with better specs. Philips  
replaced the SA602 with it.

On Apr 21, 2006, at 3:24 PM, Nigel A. Gunn G8IFF/KC8NHF wrote:

> Same device, different number. Goo ahead and melt solder.
>
>
> Bill Reid wrote:
>> The K2 manual lists SA602 for U1 on the control board and the part  
>> number in my kit is SA612.  Is this IC OK to install?
>> _______________________________________________
>>
>
> --
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> <><>
> Nigel A. Gunn. 59 Beadlemead, Milton Keynes, MK6 4HF, England. Tel  
> [phone]       mobile [phone]
> e-mail [hidden email]             www  http://www.ngunn.net 
> Amateur radio stations  G8IFF, KC8NHF
> Member of  ARRL, GQRP Club, QRPARCI, SOC #548,  Flying Pig #385,
>           Dayton ARA #2128, AMSAT-NA  LM-1691,  MKARS,  RAYNET
> <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
> <><>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

-Jack Brindle, W6FB
=======================================================================


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Alexandra Carter]

You know that little white light in your KX1? Well, that's an LED. The
KX1 LED. 73 de Alex NS6Y

On Apr 21, 2006, at 3:31 PM, Nigel A. Gunn G8IFF/KC8NHF wrote:

> I've not got a KX1 LED. Do I need one?

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com