K2 VFO Linearization problem

[NQ3RP]

I'm to the point of doing the VFO linearization.  I went into Cal PLL with the test probe on TP1, my reading is 12098.8.   I enter the Edit portion and the reading just sits there, never decreasing, never displaying "d" and never giving me an "end" message.  I get no error codes either.  Any ideas what I'm doing wrong?  Unit checks great up to this point.  Thanks for any help guys.

John
NQ3RP

[NQ3RP]

Never mind.  Found the problem, I was on the 80 band and had turned the adjustment to get to 7.00 Mhz.  Reset to 3500 and used the Band switch and all is well.  "END"

John
NQ3RP