K2 and K3 speaker grill cloth

[Cloud Runner-3]

Instructions include a "bunch of things" to try to prevent the speaker grill cloth from vibrating.  Here is what I did...

* I sparingly coated the entire area of the inside of the metal cover where the speaker cloth will be with rubber cement or contact cement.  Wiped away excess, especially in the area of the slats in the metal.  I don't want excess to appear on the outside of the radio.

* placed the speaker cloth on the contact cement, covering the speaker mounting holes, and allowed cement to dry.

* With a small soldering iron, hot, poked out the screw holes by melting the fabric with the hot tip

* mounted speaker.  Cloth is not free to vibrate, but will serve its purpose of protecting the speaker from debris and intrusion through the gaps in the metal.

73,  


Fred

K2 # 0700
K3 # 0144
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com