K2 and Kenwood MC-50 Mic

[Jim Wilson]

Ken,

I made up a short (10 inch or so) mike cord
with a 4 pin to match the MC-50 on one
end and an 8 pin on the other.

Works well. The MC-50 is set for low impedance
(dynamic) and connects to the 8 pin front mic
connector on the K3 (or others)

Works well.

Jim - W4RKS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]