K2 backlight orientation

[Denis Jackson-2]

Hi chaps,

Just building the front panel board on my k2 ser. 6160.  

All was going swimmingly until I came to fit the backlight.  The pins of the diodes on the backlight are labled A and K and the board has + and - indicated for each.  I would assume that "k" on the backlight should go into the "+" hole on the board.  Before I do what seems logical, I'm hoping somone can confirm.

Thanks

Denis

MW0CBC/GW8OQV ex VP8AQG etc. etc.
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

Denis,

Not to worrk about how it is marked - it is reversible, so if it mounts
on the board at all, it will be correct. - you cannot get it wrong.

73,
Don W3FPR

Denis Jackson wrote:
> Hi chaps,
>
> Just building the front panel board on my k2 ser. 6160.  
>
> All was going swimmingly until I came to fit the backlight.  The pins of the diodes on the backlight are labled A and K and the board has + and - indicated for each.  I would assume that "k" on the backlight should go into the "+" hole on the board.  Before I do what seems logical, I'm hoping somone can confirm.
>
>  
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-4]

That should have been 'worry' instead of 'worrk' - sorry folks.  73, Don
W3FPR

Don Wilhelm wrote:

> Denis,
>
> Not to worrk about how it is marked - it is reversible, so if it
> mounts on the board at all, it will be correct. - you cannot get it
> wrong.
>
> 73,
> Don W3FPR
>
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com