K2 control board U6 pin 29,30

[VE3WDM]

Hi all,
Just finished the control board and did the infamous resistance checks. All but U6 pin 29 and 30 check out ok.
1) Pin 29..... 95.9 ohms with a radio shack multimeter
                  96.5 with a Beckman 310 multimeter.

2) Pin 30......95.8 with the radio shack meter
                  96.3 with the Beckman

I have read the posts regarding these checks and I have reversed the leads on both multimeters and had the same readings. Checked out the soldering at U6, RP4 and P3 as well. U6 seems to be seated just fine as well. They seem to be within 10% of the recommended high end readings but just want to make sure.
Thanks
Mike
VE3WDM
Serial 06613

---

So many new options, so little time. Windows Live Messenger.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html