[K2] crystal filters bag discarded

[IZ2NYY]

I divided all the components of rf board bags into parts boxes (really handfull!), but in this way i discarded the crystal filters bag with the number necessary for alignment as indicated on page 54 of the manual. What can i do???
On the crystals is written this:

ECSX V
4.9136-S
CHINA K8

Tnx for help

Pippo
IZ2NYY
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

  Pippo,

Just assume the bag was marked with 3.7.  That is the most common, and
is close enough to get you through the process.
After the K2 is complete and the KSB12 is installed (if you are adding
that option), I recommend you refine your filter alignment in any case -
Use Spectrogram and some type of noise generator (the N-Gen is ideal).  
The instructions are on my website www.w3fpr.com in the article on K2
Dial Calibration.

73,
Don W3FPR

On 1/11/2011 11:49 AM, IZ2NYY wrote:

> I divided all the components of rf board bags into parts boxes (really handfull!), but in this way i discarded the crystal filters bag with the number necessary for alignment as indicated on page 54 of the manual. What can i do???
> On the crystals is written this:
>
> ECSX V
> 4.9136-S
> CHINA K8
>
> Tnx for help
>
> Pippo
> IZ2NYY
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html