K2 displayed power during final part 3 alignment

[Paul Huff-3]

I just completed my final alignment and testing in part 3.  It took me two tries
but I think that I finally got everything set OK.  I do however have a question
about the displayed power value on the K2 during the tuning process.  My display
seemed to be a little inconsistent during the alignment process.  For example,
on 40-meters with the power level set at 2.0 watts, punching the tune button
will usually display about 2.4 watts but once in a while it might only be 1.7
watts.  (Working into a 50 ohm dummy load of course.)  Any idea about what might
be going on with this?

Thank you in advance for any suggestions!

73,
Paul - N8XMS

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html