K2 don't communicate with KPA100/KAT100(in same EC2)

[Bo Andersson-2]

My K2 and KPA100/KAT100 have served me for over 10 years now without any problem!

After that I made the frequency calibration of K2 I made a mistake when I put contact from KIO2 and KAT2 to Control board. I put the Contact one unit up, pin 3 from KIO2/KAT2 come on pin1 on P4.

When I put all together and test, KPA100/KAT100 (both in same EC2) don’t respond.

Using Ant ½ I got answer ”PA ANT 1” also when I use menuitem ”ATU” I got the same answer ”PA ANT 1”
I hear a relay click in KPA100 when I switch on the radio.

Testing single K2/KIO2/KAT2 all work well.

Testing K2/KPA100 got 20 W with 1 – 10 W on powerbutton and full power on over 10 W.
Can’t change power with the powerbutton.

Perhaps U6 on Control Board is out of order! I measure all pin and got som differens against value in the manual.

Pin My U6 U6

  6 0.0 4.7
10 0.0 5.0
13 0.7 2.3
18 5.0 0.0
25 5.0 0.0
33 0.08 5.0
36 4.6 0.8
39 1.02 0.2

Hope I manage to explain the problem!

73 de SM6FPG /Bo



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]