Hi folks!
Had another whoopsie with my K2 Serial #7818. Number 4 wire, that attaches the encoder subassembly to the front panel, had a soldering pad disintegrate. I found this when I
was testing, and saw that the encoder was not changing the frequency up or down. I am assuming that the wire not being soldered would cause the encoder to fail the test.
I’ve had my kit together and apart multiple times now. I may have caused the malfunction by separating the boards too many times? Regardless, I’ve contacted Elecraft Parts
and requested a new encoder subassembly PCB. Hope I can get just the board and not have to buy a whole subassembly!
Other than that issue, I’m thrilled with my kit, and excited to continue populating the RF board. Do you think I should continue, or should I wait for the new PCB and complete
the testing before continuing? I guess that is one of those “Are we there, yet?” questions!
Don,KE0PVQ
Sent from Mail<
https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
