Ron,
I cannot speak specifically about the adapter you are using, but many
will not work properly at the K2 baud rate of 4800 bps. The one that I
have tried which works is an Edgeport 4 port adapter. I have heard that
the FTDI chipset adapers work better than those with the Prolific
chipset, but that is just information I have gathered by hear-say. All
I can state with certainty is that my Edgeport adapter works with the K2
using Windows XP and Ham Radio Deluxe/DM780.
73,
Don W3FPR
On 9/27/2011 10:35 PM, R Thompson wrote:
> I've been experimenting with fldigi on my K2. When I plug the KIO2
> interface RS232 directly into the RS232 of my desktop (running Ubuntu)
> RigCAT works somewhat (filter reading and selection from fldigi seems to
> have a couple of bugs), and Hamlib does not work. Its useable this way.
> If I use an A-Ten, model UC-232A, RS232 to USB adaptor with the desktop,
> or the two laptops I've tried so far, it doesn't work. It occasionally
> indicates the correct frequency and mode but usually indicates useless
> numbers.
>
> Is this a problem with the UC-232A convertor? Will using the Elecraft
> model fix this problem?
>
> On an aside, is anyone else working with an Asus EEEpc, a 701SD in my
> case, with Puppy Linux and fldigi?
>
> Ron VE8RT
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
