Thu Jan 17 17:54:46 EST 2008 John Hoaglun (NG0R) wrote ...
... I know that some people have used some sort of
inexpensive kit to allow [..] for the future upgrade path.
Are there any opinions one way or the other on that? My main concern
being any parts that I might need to desolder in the future if I don't
plan for the options now. ...
--
Hi John,
In addition to elminating the need to do any desoldering or any
additional soldering, our assembly method also saves you from having
to do any significant disassembly of the enclosure that otherwise
required when adding some of the options.
Beyond our assembly method and its associated header and duplicate
K2 parts kits, we now also have a neat internal mic adaptor for the K2
that can be easily configured to support more than 50 microphones.
(The alternative is rather significant disassembly of the K2 should
you wish to change the front panel mic connector pin out, and no easy
way to install a bias resistor.)
You can find several reviews of our products on the eHam website
at
http://www.eham.net/reviews/detail/6372 (for our headers) and at
http://www.eham.net/reviews/detail/6918 (for our mic adaptor).
See our website at
http://www/unpcbs.com/ for details and
especially check out our "Frequently Asked Questions" page. Feel
free to email Ken Kaplan and myself at < support at unpcbs dot com >
if you have any questions.
73,
Gary KI4GGX
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
